HOOK-ON Test Prods, Completely INSULATED

# 450 - Our most popular standard size, 2-1/4” long. Set of two: BLACK and RED
# 450B-BLK - bulk, black
# 450B-BLU - bulk, blue
# 450B-GRN - bulk, green
# 450B-RED - bulk, red
# 450B-WHT - bulk, white
# 450B-YEL - bulk, yellow
# 4504 - Set of four: BLACK, RED, GREEN and YELLOW
# 4506 - Set of six: BLACK, BLUE, GREEN, RED, WHITE and YELLOW
# 450S - This mini clip is ideal for those crowded, hard-to-get-at circuits,

1-9/16” long. Set of two: BLACK and RED
# 450SB-BLK - bulk, black
# 450SB-BLU - bulk, blue
# 450SB-GRN - bulk, green
# 450SB-RED - bulk, red
# 450SB-WHT - bulk, white
# 450SB-YEL - bulk, yellow
# 4504S - Set of four: BLACK, RED, GREEN and YELLOW
# 4506S - Set of six: BLACK, BLUE, GREEN, RED, WHITE and YELLOW

The injector-type prods that firmly clip onto large or small components for testing purposes. OBJECT: Meter reading for any required length of time while hands are

free for other work.

STACKABLE BANANA PLUGS

# BP1000B - bulk, black
# BP1002B - bulk, red

# BP1004B - bulk, yellow
# BP1006B - bulk, green
# BP1008B - bulk, blue

# BP1010 - (1) red and black, display packaged
# BP1014 - (1) red, black, yellow and green, display packaged

This quick design from Philmore allows user to assemble own test lead sets with quick assembly stackable design. Just insert wire into handle, solder to plug/jack assembly and snap together. Available in five colors.

no picture

available

Test Lead Wire

# 472 - 25 ft., black
# 476 - 25 ft., red
# 474 - 100 ft., black
# 478 - 100 ft., red
Perfect for making test leads. This is same quality wire as used on Philmore
#'s 466 and 467 Test Leads. Wire is 18 Gauge tinned and stranded. O.D.
of cable is .135”. Lead wire is very flexible and guarantees no kinked leads.
Available in RED and BLACK.

JUMPER CABLE SETS

# SA10 - Economy set, standard (3 strand wire) 14” long
# SA22 - Tech’s Jumper Cable Set, (12 strand wire), 22” long
10-piece sets, Color coded lead wires with insulated alligator clips on each end.

Each set includes ten leads, two each of five different colors. Indispensable for testing service, during circuit design etc. We suggest the Tech’s set to professional users,

or the # SA44 above. Colors: Black, Green, Red, White and Yellow.

IC TEST LEAD SET
# 500

5 color-coded, 16” test leads with miniature hook-on prods at both ends. A must for
technicians and experimenters who want temporary interconnects with out danger of
shorting. Colors: Red, black, yellow, green, white

HEAVY DUTY JUMPER CABLE SETS

# SA44 - Set of five, 22” long leads
# SA45 - Set of five, 36” long leads

For serious user in the lab or test bench, sets include five tough Jumper Cable, of five different colors, with insulated alligator clips one each end. 20 strand wire and flexible insulation is used for long life. Colors: Black, Green, Red, White and Yellow

TEST LEADS

# 466 - Phone Tips

# 467 - Banana Plugs

Plastic test prod handles, 4” long, 3/8” diameter, with prods 1” long. Red and Black. Equipped with 48” kinkless plastic-covered leads .135” O.D. Available with either insulated banana plugs or phone tips at other end, to fit standard American jacks.

ALL-PURPOSE TEST LEAD SET

# 470

The most useful test leads yet devised. Use them in the conventional manner or

adapt them to individual requirements.
• Tiny, sturdy, push-to -clip prods can be firmly attached to hard-to-reach

components in chassis-whether large or small terminals. Clip-onto-component feature enables you to test parts for long periods without actually handling the test leads. Hands are free for other work. • Each prod is connected with solderless, kinkless wire terminating in an insulated banana plug • A removable, nickel-plated phone tip (supplied) fits over the banana plug allowing the individual the option of using meters with either banana or phone tip jacks. • Overall leads length is 36 inches. • Two unbreakable high dielectric strength prods, black and red

DELUXE UNIVERSAL SOLDERLESS TEST LEAD SET
# SA15

Two 42” flexible, vinyl-covered test leads, heavily insulated to prevent high voltage
breakdown and cut-through. 80 -strand copper conductors eliminate wire fatigue and
assure long life. Equipped with adaptor accessories most often used by servicemen,

this kit can perform virtually every test requirement. Each lead is attached to a 4-3/4” probe (1-red, 1-black). Banana plugs on each end have nickel-plated phosphor bronze springs to maintain rigid contact through many thousands of insertions. Heavy plated BRASS Adaptors-Color-coded Spade Lugs*-large enough for lab. instruments

(up to 1/4” dia. center post). Test prod phone tips(0.180” dia.) Strong spring action alligator clips. NP phone tips.-not insulated. Each insulated adaptor completely covers banana plugs to eliminate accidental contact, avoiding shorts.

4mm Stackable Jumper Leads

Part Number, Color, Length:
# 28-5110-25 Black 25cm  # 28-5112-25 Red 25cm  # 28-5114-25 Yellow 25cm
# 28-5115-25 Green 25cm  # 28-5116-25 Blue 25cm  # 28-5119-25 White 25cm
# 28-5110-50 Black 50cm  # 28-5112-50 Red 50cm  # 28-5114-50 Yellow 50cm
# 28-5115-50 Green 50cm  # 28-5116-50 Blue 50cm  # 28-5119-50 White 50cm
# 28-5110-100 Black 100cm  # 28-5112-100 Red 100cm 

# 28-5114-100 Yellow 100cm  28-5115-100 Green 100cm
# 28-5116-100 Blue 100cm  # 28-5119-100 White 100cm

These high quality super-flexible jumper leads are made of the finest materials.

The plugs are made of Nickel-plated brass cage springs. They are available in three
lengths and colors for use in Labs, by technicians, and do-it yourselfers.

Specifications: Material: Nickel-plated Brass, Handle: PVC, Wire: Soft Silicon Jacket
Current Rating: 19A@ 50V, Size: 4mm

Shrouded 4mm Test Lead Set

# 28-5621, 90o w/ fixed shrouds
# 28-5623, 180o w/ retractable shrouds

This pair of test leads is made for use with multimeters, and other test equipment requiring 4mm safety plugs. We offer 2 styles; a 180o style with retractable shroud,

or a 90o style with a fixed shroud on one end and a rigid probe on the other end.
The probe end has heavy duty cage spring tips and includes crocodile adaptor clips.
Specifications: Material: Nickel-plated Brass, Handles: PVC, Rating: 1000V, 10A
Compatible w/ IEC1010, Length: 1M (39.6”), 1 Red + 1 Black/ package, Red & Black Crocodile Clip, Cage spring tip on probe

Shrouded 4mm Test Lead Kit

# 28-5527, 90o w/ fixed shrouds
# 28-5520, 180o w/ retractable shrouds

This pair of test leads is made for use with multimeters, and other test equipment requiring 4mm safety plugs. We offer 2 styles; a 180o style with retractable shroud,

or a 90o style with a fixed shroud on one end and a rigid probe on the other end.

The probe end has needle tips. The kit includes crocodile adapter clips.
Specifications: Material: Nickel-plated Brass, Handles: PVC, Rating: 1000V, 10A,
Compatible w/ IEC1010, Length: 1M (39.6”), 1 Red + 1 Black/ package + 1ea,

Red & Black Crocodile Clip, Needle probe

INSULATED SR. SOLDERLESS PHONE TIP PLUG

# 2348P - (1) black, (1) red, display packaged
# 2348-BLK - bulk packaged, black
# 2348-RED - bulk packaged, red

Fits all standard phone tip jacks. Insulated sleeve 3/4” long. Cable opening 3/16”. Available in red or black. • Length: 1-15/16” overall

SOLDERLESS TEST PRODS

# 912J - Bulk ONLY, red handle, 4” long,
# 913J - Bulk ONLY, black handle, 4” long

Made of non-breakable extruded plastic, and available in red and black.

Equipped with brass nickel plated solderless phone tips 3/4”long.