MULTI-MEDIA AMPLIFIED STEREO SPEAKER SYSTEM

# MW6897

A shielded speaker pair for use with a personal computer system. The built-in audio amplifiers produce up to five watts per channel; and a frequency response from 120 to 20,000Hz. Volume and bass controls are on the front of the speakers, as well as a headphone jack for private listening. The system is powered by an AC adaptor; included. Each unit is a compact 4” wide, 4.5” deep and 6.5” tall. UL Listed.

“The Bass Booster” AMPLIFIED STEREO SPEAKERS with

DXBB CIRCUIT & TREBLE BOOST

# MW6890

This stereo system is designed for use with all personal stereo products and electronic keyboards. The speakers have bass boost switch on front with volume control and treble boost switch on back panel. The speakers require 2 (C) cell batteries each or 6 V AC/DC adaptor (batteries or adaptor not included). The convenient connecting cable provided to second speaker includes DC power cable so that only one connection is required when using AC/DC adaptor. LED on front indicates power ON-OFF. Power off switch located on back panel. Speaker impedance is 4/8 ohms.

PRO-FIT IN WALL SPEAKERS

# 44-525 (1) Pair 5 1/4” System+Mounting Brackets

Pro-Fit 525 IN-Wall 2-Way Speaker System
This exceptional sounding 5 1/4” stereo speaker system consists of a 5 1/4”
Woofer with 10 oz ceramic magnet and a 1” soft cone tweeter. Each pair comes
with mounting bracket, paintable grills and template for easy Installation.

Specifications: Frequency Response 50 Hz-20 KHz, Power Handling 60 Watts Max./Pair,
Impedance 8 ohms, Sensitivity 90dB, Dimensions 11” H x 7.5” W x 2.75” D

# 44-650 (1) Pair 6 1/2” System+Mounting Brackets

Pro-Fit 650 IN-Wall 2-Way Speaker System
This exceptional sounding 6 1/2” stereo speaker system consists of a 6 1/2”
Woofer with 10 oz ceramic magnet and a 1” soft cone tweeter. Each pair comes
with mounting bracket, paintable grills and template for easy Installation.

Specifications: Frequency Response 40 Hz-20 KHz, Power Handling 80 Watts Max./Pair,
Impedance 8 ohms, Sensitivity 90dB, Dimensions 12” H x 8.5” W x 3.0” D

# 44-800 (1) Pair 8” System+Mounting Brackets

Pro-Fit 800 IN-Wall 2-Way Speaker System
This exceptional sounding 8” stereo speaker system consists of a 8” Woofer with

a 13 oz ceramic magnet and a 1” soft cone tweeter. Each pair comes with mounting bracket, paintable grills and template for easy Installation.

Specifications: Frequency Response 30 Hz-20 KHz, Power Handling 100 Watts Max./Pair,
Impedance 8 ohms, Sensitivity 90dB, Dimensions 14” H x 10.5” W x 3.5” D

PA SPEAKERS

# TS40, 4” SPEAKER

Fine quality replacement speaker. 4” speaker with 1.7 oz. ceramic magnet.

Speaker is 8 ohm impedance rated at 5 watts.

# TS50, 5” SPEAKER

Fine quality replacement speaker. 5” speaker with 1.7 oz. ceramic magnet.

Speaker is 4 ohm impedance rated 6 watts.

# TS60, 6” SPEAKER

Fine quality replacement speaker. 6” speaker with 3.0 oz. ceramic magnet.
Speaker is 8 ohm impedance rated at 10 watts nominal 15 watts peak.

PA SPEAKERS

5 WAY STEREO SPEAKER SELECTOR

# 44-505
This professional quality selector box is designed to help distribute quality sound throughout your complete Home Theater System. There is built-in protection for your amplifier. The switch can control up to five (5) stereo pairs of speakers in any

combination and maintains a constant impedance load to the amplifier.

Specifications: Power: 50 Watts RMS per Channel, Max Power: 75 Watts per Channel
Load Protection: Non Inductive 50 Watts, Outputs: 5 Stereo Speaker Pairs
+ 1 1/4” Headphone Jack, Size: 8” W x 4” D x 2” H, Case: Black Metal

PA SPEAKERS

6” ALUMINUM PA SPEAKER WEATHER PROOF

#WP10

• HORN MATERIAL - Aluminum - Baked Gray Enamel Finish - Weather proof

sealed - Heavy duty metal mounting bracket - Rubber edge guard on metal horn
• FREQUENCY RESPONSE 250-15,000 Hz. • POWER RATING 15 Watts Maximum
• SENSITIVITY 105 dB / 1W / 1M • VOICE COIL IMPEDANCE 8 ohm
• SIZE 6” Diameter 6” Length

PA SPEAKERS

REFLEX TRUMPET 5-1/4” INDOOR / OUTDOOR

# WP4

A compact speaker for all purposes. UNIVERSALLY DESIGNED FOR: • BOATING PAGING HORN • FIXED OR MOBILE COMMUNICATIONS • SECURITY
MODERATELY PRICED - IDEAL WHERE WIDE FREQUENCY RESPONSE IS NOT A FACTOR
ALL EXPOSED METAL STAINLESS STEEL.
This highly efficient speaker is a true re-entrant horn design. The speaker is totally weatherproof and has a white plastic casing of high impact, rugged construction.

Can be mounted anywhere, with the 110º adjustable swivel bracket and screw flange.
Supplied with 12 ft. length weatherproof leads with 3.5mm phone plug on lead.
SPECIFICATIONS: Power Handling Nominal Capacity: 8 watts (Handles up to 15 watts),
Frequency Response:700 to 7000Hz, Impedance: 8 ohms,

Overall size: 5-1/4” dia. x 6” depth

PA SPEAKERS

HORN

# WP20

30 WATT 8” OUTDOOR • HAILING • PA • PAGING

• WATERPROOF • RUST/SHOCK RESISTANT • STAINLESS STEEL MOUNTING HARDWARE
• COMPLETELY SEALED FOR MARINE & MOBILE APPLICATIONS
A smooth, wide frequency response of 450-10,000Hz assures excellent dispersion
of music and voice. 30W of continuous power (60W peak) makes it capable of reproducing clear and crisp sound over long distances in noisy terrain. A rubber sealing gasket is provided for sealing mounting base to wall. Its sleek white lines make this rugged plastic horn ideally suitable for marine craft of all sizes.

SPECIFICATIONS: Input power: 30W continuous, 60W peak, Impedance: 8 ohms,
Freq. Resp.: 450-10K Hz., Magnet: 10 oz. ferrite, Size: 8” x 4-1/2” x 9-1/4” long

INDOOR/OUTDOOR TRUMPET SPEAKERS WITH PLENTY OF POWER TO SPARE

# WP12, 15 watts

# WP13, 25 watts

• ALL WEATHER • RUST RESISTANT • SHOCK RESISTANT • SWIVEL MOUNTING
BRACKET • PAGING: SPORTING EVENTS • MARINE • AUDITORIUM

Hot or cold, the smooth response will hold because these reflex horn speakers can withstand extreme climatic conditions without any loss. Lightweight heavily enameled

ABS plastic has a rubber, sound-dampening ring around the outside edge and is
attached to a 24” color-coded connecting cord, stripped and tinned.

SPECIFICATIONS:

# WP12, Horn Opening 5” x 8”, Frequency Response 350-13,000 Hz, Impedance
8 ohms, Power Rating 15 Watts
# WP13, Horn Opening 6” x 11”, Frequency Response 300-12,000 Hz, Impedance
8 ohms, Power Rating 25 Watts

5” REFLEX TRUMPET HORN

# WP7
NEITHER SLEET, NOR SNOW, NOR RAIN STOPS THIS TRUMPET HORN SPEAKER

for weather and weatherproofing. The efficient sound displacement is consistent,
whether used indoors or out. The beautiful, metallic blue horn is mounted on a stand,

fully adjustable through 90º Power Rating: 10 Watts (RMS) Frequency Response: 450-10,000 Hz Impedance: 8 Ohms Cable: 1 Ft. Size: 5” x 5” x 5” Weight: 1 Pound

8” SPEAKER

# SP800 (speaker only)

# SP800-70 (with 70V/10W transformer)

# SP800-25 (with 25V/10W transformer)

This quality 8” speaker is well-suited for public address systems and background
music installations. Metal frame has mounting holes for line matching
transformers. Power rating: 20W; 10 oz. magnet; 1 “voice coil; 8-ohm impedance.

WEATHER RESISTANT ELECTRONIC SIREN
# SH12

• Provides sharp blasts of high and low whoop tones • 115 db/m sound pressure level
• No moving parts • Protects homes, cars and boats • 10 Watts • 12V DC
• 5-1/4” Diameter x 5-3/4” Length

HIGH POWER INTEGRATED CIRCUIT MEGAPHONE

# ES25

20 WATTS CONTINUOUS -25 WATTS MAX.

• ALL WEATHER CONSTRUCTION • ELECTRONIC SIREN • EFFECTIVE RANGE OVER 300 YARDS • VOLUME CONTROL

Big output power with small power consumption. As light as our # ES15 but with

25 watts maximum power output. Bell Diameter: 9-1/4”, Length: 14”,

Weight: 3 lbs. 5 oz.,  Requires: 8 “C” size batteries (not included)

HIGH POWERED MEGAPHONE

# ES15

• ALL WEATHER CONSTRUCTION • ELECTRONIC WAILING SIREN • EFFECTIVE

RANGE: 300 METERS • HOWL-CANCELLING MIKE

Light enough for single hand control-yet packs enough power to be heard over

rough seas or the stormiest weather.

16 WATTS MAXIMUMPOWER OUTPUT. Press a button for loud, piercing,

continuous siren blare in emergency situations. Press a switch for speech. A howl-cancelling volume controlled microphone makes speech loud and clear enough to

be heard over 300 meters! Complete with shoulder strap.

Bell Diameter: 7.35”, Length: 14.5”, Weight: 3 lbs. 5 oz. (without batteries)
Requires: 6 “C” size batteries (not included)

SUSPENDED CEILING SPEAKER MOUNTING SYSTEM for 8” Speaker Baffles

# STB8 - Tee Bar Bridge
# SPH8 - Protective Enclosure
# S8W - White Plastic Round Ceiling Baffle
# SD8W - Sound Diffuser

The original device for supporting speaker assemblies in Tee-Bar acoustical tile ceilings.
• Distributes weight on Tee-Bars. • Bridge supports 4 times total assembled weight.
• Properly installs all 8” baffles that mount on 11-1/4” diameter circle.
• Accepts SPH8, protective enclosure (Top Hat) which can be assembled on top
of bridge or through center of bridge below.
• Mounting hole marker supplied. • Made of High Impact Grade Polystyrene.

Miniature PM Speakers ALNICO V MAGNETS

FULL ROUND TYPE WITHOUT FLANGES
# TS19 - 1-1/2”
# TS20 - 2”
# TS21 - 2-1/4”
# TS25 - 2-1/2”
# TS26 - 2-3/4”
# TS28 - 3”
# TS36 - 3-1/2”
# TS31 - 4”

SQUARE TYPE
# 707 - 1-1/2”, Mtg. Ctrs. - 1-9/32”
# TS27 - 3”, Mtg. Ctrs. - 2-5/16”
# TS35 - 3-1/2”, Mtg. Ctrs. - 2-25/32”
# TS29 - 4”, Mtg. Ctrs. - 3-1/4”

Philmore miniature speakers have broad application in radios, tape players, intercom’s, headphones. A complete spectrum of compact sound applications. These high-quality speakers are equally suited to the volume producer of electronic devices and to the individual experimenter or hobbyist. Voice Coil Impedance: 8 ohms.

“L” Pad Level Controls

# SLP8, STEREO 8 ohms
# LP8, MONAURAL 8 ohms

2-1/8” dial plate finished in matte silver and black is supplied.
Mounts in 3/8” panel hole 1” long threaded bushing complete with
mounting nuts. Includes black plastic contour knob 15 watts RMS at 8 ohms.

Mono "L" Pads
# LP100, 100 Watts RMS at 8 Ohms
# LP50, 50 Watts RMS at 8 Ohms
Stereo "L" Pads
# LP200, Dual Ganged Attenuators, each 100 Watts RMS at 8 Ohms
# LP75, Dual Ganged Attenuators, each 50 Watts RMS at 8 Ohms

Control speaker volume in remote high power Hi-Fi or commercial sound installations. Maintain constant loading on amplifier at all volume settings. 3/8” bushing mounts in

3/8” diameter hole. In addition to reliable operation at full rated load, these attenuators are beautifully styled to be an attractive addition to any sound system. The brushed aluminum face plate is calibrated from 0 dB to infinite attenuation in eleven steps.

ECONOMY 100W STEREO

# SLP10, 8 ohms

This lower cost L-Pad has electrical and mechanical specifications similar to those

of the # LP200. Smooth low-noise action provides long lasting sound adjustment capability. The # SLP10 is not precisely calibrated to match the decibel markings on No. LP200. A black face plate and knob are supplied as illustrated.