Electrical (and others) Tape

Who would have thought there could be so many different kinds of tape out there!

We've got one of our featured vendors, Philmore Manufacturing's catalog available online.

Click here to see the catalog.

Professional: Excellent stretch, adhesion and conformability, Resists abrasion, moisture, solvents and UV rays,

Ten colors for electrical and splicing applications, Flame-retardant, Performs well up to 600 volts and between

0 degrees Fahrenheit and 221 degrees Fahrenheit, Indoor/outdoor use, UL and CSA approved,

Available Colors: blue, black, green, orange, red, white, grey, yellow.

All Purpose: 7-mil, Flame retardant, UL listed--suitable for use at no more than 600V, CSA listed--do not

handle below -7 degrees Fahrenheit or more than 80 degrees Celsius (176 degrees Fahrenheit).

Friction: 15-mil strong cotton cloth, Traditional cover for rubber electrical splices, Excellent for wrapping

hockey sticks, baseball bats and garden tools.

Tommy Tape: Self-fusing silicone repair tape, Water-tight seal for automotive, electrical, marine, plumbing

and general purpose applications, Bonds to itself within 24 hours at room temperature, For use at -85 degrees Fahrenheit (-65 degrees Celsius) and 500 degrees Fahrenheit (260 degrees Celsius) and up to 8,000 volts.

Rubber Splicing: 30-mil rubber, Self-fusing, Forms water-tight cover for electrical splices.

Vinyl Plastic Electrical Tape

Color Duck Tape

Assorted Vinyl Electrical Tape

These assortments are convenient sizes for color coding electrical connections.

They are available in two different put-ups.

X-Treme Duck Tape
It is not the same OLD DUCK TAPE anymore. These radically COOL colors are “hot”.

They are every bit as tough as traditional Duck Tape.

DUCK Tape
Just because it looks like Duck tape, feels like Duck tape and tears like duct tape does not mean they

all are the same. There are as many types of DUCK tape as there are ducks. Manco manufacturers

several grades depending on usage.

200 mph Reflective Auto Tape
This special tape was first discovered by race car drivers who used it on their vehicles and the tape

would adhere to the cars at speeds up to 200mph. It is reflective and is great on mailboxes, bikes,

Autos, tree stakes and emergency kits. There is over 1001 uses.

667 Pro Series Vinyl Electrical Tape
This is a complete line of professional grade Electrical Tape. It is designed for performance and value.

Manco’s professional grade 667 series electrical tapes are UL and CSA approved. They are available in

eight (8) colors designed for electrical coding and splicing applications. These tapes have excellent stretch, adhesion and conformability and perform well in both indoor and outdoor applications.

Magnetic Mounting Tape
This Manco product is designed for semipermanent and removable applications. It can be mounted

to the back of an item and than attached to any metal object.

Double-sided Mounting Tape
These Manco products are designed for semi-permanent and removable applications.

These products are available in several put-ups.

Economy Vinyl Electrical Tape
This electrical tape is designed to compete with the imports, however, the stretch, adhesion and
weather-resistant qualities are far superior. They are packaged in a sleeve of ten (10) rolls and
250 rolls to a master carton.

Double-sided Clear Mounting Tabs
These are neat and convenient for attaching objects to almost anything. Use instead of nails, tape or glue.
Removable by stretching and it leaves NO residue.

tycoDuct Tape
This Polyken 203 Duct tape is an indispensable tool of the trade. We offer many colors for multipurpose
use. With these colors to choose from it is easier than ever to pick the correct color for color coding,
decoration, seat repair, carpet seaming, electrical protection, and caution. Professionals choose
the best, tyco brand. Meets UL 723

tyco / Adhesives Gaffer’s Tape
The leading roll on the set. This tape is used by professionals on stages, sets, and on location.
This versitle low gloss tape has become indispensable for the arts and entertainment industry.

Users appreciate the aesthetics of the matte finish, low residue, and easy tear. Some applications include

wire hold down, stack blocking and spiking, audio-electric overhead lighting, set and stage decoration,

film canister sealing, carpet holddown, splicing, bookbinding, seat repair, graphics and design, and waterproof packaging. We offer the tape in several of the most popular colors.

Meets Packard Electric 525-000 Specifications

Great Tips

Removing Adhesive: The key to removing rubber adhesive is to let the solvent do the work for you.

The longer you let it soak in, the easier it is to remove the adhesive. Five to ten minutes is usually enough

time. Always test solvents on a small, inconspicuous area to make sure they won't damage the surface. If the adhesive is on an absorbent surface, you may want to avoid oil or petroleum-based solvents.
For general adhesive removal, we recommend De-Solv-It, Goo-Gone, WD-40 and Goof-Off.
De-Solv-It and Goo-Gone are non-toxic, environmentally-safe, citrus-based cleaners. They do not contain

harmful chemicals and are safe to use on most surfaces. Both products are available at major discount stores

and hardware and home centers. For more information, contact De-Solv-It at 1-800-887-7771 and Goo-Gone

at 1-800-321-6330.
Goof-Off, a xylene-based solvent, is good for removing adhesives from durable surfaces. It's available at major discount stores and hardware and home centers, or you can contact the company at 1-800-253-3957.
A "home remedy" we recommend is WD-40. The petroleum-based lubricant is excellent for removing adhesives. Rubbing alcohol also works for removing light adhesives, but evaporates quickly. Remember to test these

products before applying on a large scale.

Cutting Duck Tape: It's easier to rip Duck Tape by hand than to cut it with scissors. If you try to cut Duck

Tape, it will gum up and stick to itself, or stick to the scissors. Rubbing alcohol will remove adhesive from the blades.

Storing Duck Tape: Store Duck Tape in a dry, temperate environment to keep the adhesive pliable. Prolonged exposure to direct sunlight, extreme heat and/or water may cause the adhesive to dry out or fuse to the layer

of tape beneath, making it nearly impossible to rip off a full strip of tape.
When stacking rolls of Duck Tape, place a sheet of waxed paper between the rolls to prevent sticking.

Preparing the surface: Make sure you have a clean, dry surface before applying Duck Tape. If the surface is dusty, dirty or oily, your temporary repair may not hold very long! A splash of rubbing alcohol will remove grime

and residue left from cleaners and other solvents.

Application temperature: Duck Tape works best when it's not cold. If the surface temperature is below

40 degrees Fahrenheit, the adhesive will harden and possibly freeze before adhesion takes place.

What are the different grades of Duck Tape? Grades are based on the thickness of the tape and the

durability of the cotton fabric backing.

Good: Utility, Better: All-Purpose, Best: Professional, Superior: Industrial.

Removing Duck Tape: Run a hair dryer or heat gun over the tape backing to warm and soften the adhesive.

After a minute or two, you can peel the tape away. Saturate the rubber adhesive with solvent and let it soak

in for 5 to 10 minutes. Place a rag or towel over your index finger and rub the adhesive in a circular motion

until it comes off.